Free tool · Amazon KDP paperbacks
Book spine width calculator
Pick your trim size, page count and paper. Get the exact spine width, the full cover size with bleed and a cover drawn to scale, using KDP's published figures.
Your Book Title
- Bleed, trimmed off (0.125 in)
- Trim line
- Spine folds
- Keep text inside
The formula
How book spine width is calculated
Spine width is your page count multiplied by the thickness of one page. The thickness depends on the ink and paper you choose in KDP.
width = 0.125 + trim W + spine + trim W + 0.125
height = 0.125 + trim H + 0.125
Example: a 6 × 9 in book with 200 pages on cream paper has a spine of 200 × 0.0025 = 0.500 in. The full cover is 0.125 + 6 + 0.500 + 6 + 0.125 = 12.750 × 9.250 in.
Why bleed matters
Covers are trimmed after printing, and the cut can drift slightly. Bleed is 0.125 in of extra artwork on the top, bottom and outside edges, so the trimmed cover never shows a white sliver.
Paper thickness
Inches per page, by ink and paper
| Ink and paper | Per page | 200 pages |
|---|---|---|
| Black & white, white paper | 0.002252 in | 0.450 in |
| Black & white, cream paper | 0.0025 in | 0.500 in |
| Standard colour, white paper | 0.002252 in | 0.450 in |
| Premium colour, white paper | 0.002347 in | 0.469 in |
Figures from KDP's paperback cover guidelines. IdeaToBook's cover builder sizes spines for white or cream paper.
Skip the maths
IdeaToBook builds the whole cover at the right spine width.
Back, spine and front, sized from your book's page count and trim size, with a clear barcode area. Along with the book itself, written in your voice from a short interview.
Questions
Spine and cover questions.
Short answers, with KDP's numbers.
How do you calculate book spine width for KDP?
Multiply your page count by the thickness of one page. KDP's figures are 0.002252 in per page for white paper, 0.0025 in for cream paper, 0.002252 in for standard colour and 0.002347 in for premium colour. A 200-page book on cream paper has a spine of 0.500 in.
How many pages do you need for spine text on KDP?
KDP's cover guidelines need at least 79 pages for spine text, and reject covers with spine text on shorter books. Keep spine text at least 0.0625 in from each edge of the spine. Thinner books need a plain or solid-colour spine.
How big should a KDP paperback cover be?
The full cover width is bleed + back cover + spine + front cover + bleed, and the height is bleed + trim height + bleed. Bleed is 0.125 in. A 6 × 9 in book with 200 pages on cream paper needs a 12.750 × 9.250 in cover.
Where should text go on the cover?
Keep front and back cover text at least 0.125 in inside the trim lines. KDP allows the folds to vary by 0.0625 in either side, so don't run text or fine detail right up to the spine.
What's the minimum page count for a KDP paperback?
24 pages for black ink on white or cream paper and for premium colour, and 72 pages for standard colour. The maximum depends on the ink, paper and trim size, so check KDP's print options for your book.
Does IngramSpark use the same spine width?
Not necessarily. This calculator uses KDP's paper figures. Other printers use their own paper and spine specifications, so use their cover template for a book printed there.
Why are there only 7 trim sizes?
These are the 7 trim sizes IdeaToBook typesets books in, so the calculator gives the same numbers as the cover files IdeaToBook makes. KDP prints more sizes, and the formula is the same for any of them.